How to Use Bathmate Hydro Pump for Best Results

Want to increase size of your dick? Bathmate Pump is the best way to accomplish it. But, you need to use Hydromax properly for the best result.

how to use bathmate hydromax penis pump?

Bathmate Hydro Pump is guaranteed to deliver amazing gains it terms of penis size, among many other related benefits. This however, will be the case under the condition that you follow the correct usage guidelines. Failure to do so might result in unsatisfactory results making it a waste of time and effort. The correct procedure is as below.

How to Use Bathmate Hydro Pump Effectively?

After choosing proper bathmate model, you should know the best way to use it. Below are easy to follow steps to use your bathmate hydromax for maximum result.

  1. Slide the latch valve to the central position

The latch refers to the valve that is located at the top of the pump. It has three possible positions, bottom, middle and top. The central position is when the valve is open and the top and bottom positions close it. In order to switch, you need to first push it down slightly then move it to the desired position. Start by ensuring that it is in the central/open position.

  1. Choose the right comfort pad

The short insert should be used when you are in the shower. If you are using the Bathmate Hydro Pump while in a bath, simply choose any comfort pad that feels the most comfortable to you. Insert the correct comfort pad and ensure that the markings are aligned properly.

  1. Rotate the measuring guide

You might wish to track your gaining progress during the time of usage. A measuring guide is provided for this purpose. The vessel and the gator can easily be rotated independently to bring the measuring guide to the top side for easy viewing. If you do not wish to track your progress, you can rotate it to the backside.

  1. Warm up

It is important that you take about five minutes to warm up in the water before using the Bathmate Hydro Pump. This should be the case irrespective of whether you are taking a shower or a bath. The main importance of this is to heat your body and boost the blood circulation.

  1. Fill the pump with water

After the warm up, completely fill the Hydro pump using water from your bath or shower then insert your penis into it. Ensure that you spill as little water as possible while inserting your penis. Pull the pump towards your body aiming to create a tight seal. A few trials might be necessary for this part until you get used to doing it.

  1. Pump

You have to pump in order to expel water and create some suction pressure. Pulling the pump towards your body will expel water from the top of the vessel. You will feel your penis being sucked further into the pump as you as the suction increases during the pumping session. [Semenax discount codes]

  1. Maintain pressure

To avoid over suction damage, the Bathmate Hydro Pump was designed to release pressure gradually when in use. You can re-pump whenever you feel that the suction has gone low.

  1. Remove the Hydro pump

To remove the pump after the session, you should start by releasing the suction created. Press the valve inwards towards the pump to do it. Once the pressure is decreased, it should come off easily.

How often to use Bathmate?

It is recommended that the Bathmate be used on a daily basis during your bath or shower time. A single session should last for 15 minutes. You should read my sizegenetics and bathmate routine to gain maximum result.

Things to consider while using Bathmate Hydro Pump

  • Make sure your physician approves of it before starting to use
  • Be consistent with usage to realize great results
  • Always store the pump safely in a hygienic and conducive environment.

If you can’t afford to buy bathmate then you should think to make your own penis pump. Read my older post for same.

Leave a Reply